Linear Light Aluminium Profiles

The extrusion library behind our linear and office luminaires: 186 cross-sections from a 8 × 9 mm cabinet strip to a 65 × 25 mm main-line profile, each with a matched PCB channel width. Supplied as extrusion + PC diffuser + end caps, cut to your lengths.

Range Facts

Cross-sections — 186 standard dies, 8×9 mm to 65×25 mm.
PCB widths matched — 5 mm to 47 mm inner channel.
Supply form — aluminium + PC diffuser + end caps, cut to length.
Optics — opal, milky or clear PC; downward, double-up, double-down and angled light output.
Special formats — in-ground, wood-clamping, round (φ30/φ60), triangular, skirting combinations.
CRI / CCT — 80–90; 3000 K / 4000 K / 6000 K with LED boards fitted.

Cross-Section Selector

Pick the PCB width you plan to mount; the table lists matching dies. The full 186-die list is issued as a datasheet pack on request.

Application	Die examples	Cross-section (W×H mm)	Matching PCB width
Cabinet & shelf strips	TX-011, TX-079, TX-078	8×9 / 10×8 / 8×7	6 / 5 / 5 mm
Display & cove	TX-012, XK-037B, TX-009, TX-010	13×9 / 10×10 / 10×13 / 16×13	5–8 mm
Office main lines	TX-1210, TX-1212, TX-142, TX-143	12×10 / 12×12 / 17.5×7 / 24.5×7	8–12 mm
General linear runs	TX-026, TX-029, TX-128, TX-129, TX-043	22×14.5 / 17×12 / 14.5×9 / 21×9 / 14×8.8	12 mm
Suspended office pendants	TX-140, TX-041, TX-059, TX-040	30×20 / 20×15 / 25×15 / 30×30	17–28 mm
High-output lines	TX-014, TX-015, TX-016, TX-013	50×20 / 65×25 / 50×25 / 65×20	47 mm
In-ground	TX-D30, TX-D50	30×20 / 50×35	23 / 45 mm
Wood-clamping (furniture)	TX-061A, TX-061, TX-066	26×16 / 29×21 / 29×30	12 mm, board 18 mm
Double-emission (up+down)	TX-330, TX-331, TX-339, TX-340, TX-346–350	12×13 to 50×20	5–45 mm
Round & triangular	TX-135, TX-060, 13×13 triangle	φ30 / φ60 / 13×13	30 / 60 / 8 mm

Corner connectors available for the relevant dies: 90° left/right, 135°, 180°, plus end-cap sets. Accessories are quoted per piece with the profile.

Applications

Office ceilings & pendants

Continuous lines along desk grids using the 12-series and 20-series dies.

Furniture & joinery

Wood-clamping and cabinet strips integrated into shelves, wardrobes and counters.

Architectural coves & façades

Double-emission and high-output dies for coves, canopies and in-ground washes.

Series FAQ

What is supplied with each profile?

Each profile is supplied as aluminium extrusion + PC diffuser + end caps. Corner connectors (90°, 135°, 180°) and accessory sets are ordered separately.

Can you cut profiles to our lengths?

Yes. Profiles are cut to your run lengths before packing, and we can pre-fit the diffuser and end caps so the sections arrive ready to install.

How do I choose the right cross-section?

Start from the PCB width you plan to mount, then pick a profile whose inner PCB channel matches it. Our table lists the matching PCB width for every cross-section.