Seven series cover the bulk of commercial lighting enquiries we receive — retail, office, hospitality, transport and industrial interiors. Each series is available in several profiles, materials and finishes, and every one can be built to your drawing rather than only to ours.
Slim round and square bodies for ceilings with no void, or where the ceiling must not be cut. Our core series and the most widely specified.
Typical buyers: refurbishment contractors, retail chains, wholesalers.
View series →Flood, grille and rocket luminaires on a 22×25 mm track — 6–40 W, tool-free repositioning for retail and gallery layouts.
Typical buyers: retail designers, gallery and showroom contractors.
View series →Edge-lit and back-lit panels, 300×300 to 600×1200 mm, 20–100 W, for T-grid and surface ceilings.
Typical buyers: office fit-out contractors, electrical distributors.
View series →186 cross-sections from 8×9 to 65×25 mm with matched PCB channels — surface, recessed, in-ground and wood-clamping.
Typical buyers: luminaire assemblers, joinery and fit-out contractors.
View series →Convoy narrow-rim, Bauhaus curved and Rome surface COB families — 2–3.5″, CRI 97, φ35–φ72 lens optics.
Typical buyers: hotel project buyers, boutique retail.
View series →Great-Wall wall washers (φ35–φ115 apertures, 5–40 W) and plaster-in trimless round bodies.
Typical buyers: hospitality projects, facade lighting contractors.
View series →Suspended LED linear luminaires: 2835 SMD, UGR≤16/19/20, 40/60/80 W, single / double / triple row, customizable lengths in 6063 aluminium.
Typical buyers: office and retail project contractors.
View series →Fixed and adjustable tilt bodies sized to standard cut-outs — includes the Great-Wall, Convoy and X6 recessed families.
Typical buyers: fit-out contractors, hotel project buyers.
View series →Working from your drawing, 3D file or a reference sample. Tooling, casting or extrusion, finishing, assembly and your branding.
Typical buyers: brand owners and private-label importers.
Discuss a custom part →If you are specifying for a project, the table below is the fastest way to narrow the range before you contact us.
| Series | Best suited to | Key selection factors |
|---|---|---|
| Surface mounted | Ceilings with no void, refurbishment, visible fittings | Profile depth, diameter, IP rating, tilt requirement |
| Recessed | Flush ceilings where the fitting should disappear | Cut-out size, ceiling thickness, fixed or adjustable tilt |
| Magnetic track | Retail and gallery layouts that may be rearranged | Track type (recessed or surface), profile length, body count |
| Panel frames | Office interiors on standard ceiling grids | Grid module size, back-lit or edge-lit construction, UGR |
| Linear | Continuous runs and architectural lines | Cross-section, mounting method, diffuser type, joint alignment |
| Anti-glare spotlight | Work environments with a glare requirement | Recess depth, louvre or reflector optic, beam angle, UGR target |
| Wall washer | Wall faces that need even vertical illumination | Asymmetric optic, spacing-to-height ratio, trim finish |
Send us the application and a photo or drawing. We will recommend the series, profile and finish that suits it.
